Mosfet Gate MERF 3.2

Mosfet Gate MERF 3.2

Mosfet third generation programmable trigger. The system has 10 functions. The new Burst mode allows to limit the length of the series. The system allows for lossless rate of fire regulation, protects modern Li-Ion batteries: LiPoly and LiFePO4.

Thanks to two operating modes, the system works with both the original and modified AEG installation. The system is designed for all replicas, especially tunings. It has been adapted to work with the strongest springs, including the M170. The system works properly in the voltage range 3.2-15V. The current consumption in the standby state is 0.15mA and the resistance of the entire system is 2.4m ?.

Functions of the system:

1. The standard MOSFET function (eliminates all losses occurring during the closing of mechanical contacts, and protects them against unavoidable burning.) The energy from the battery is directed directly to the motor.
2. Active brake (does not allow you to stretch the piston after the shot, the piston will always be in the rear position and the engine stops immediately after releasing the trigger)
3. Undervoltage protection for Li-Poly / Li-Ion / LiFePO4 / NiCd batteries
4. Short-circuit protection
5. Thermal protection
6. Programming
7. Adjusting the rate of fire
8. Burst mode
9. Smart Trigger
10. Operating modes:
– Basic mode. There is no need to modify the original installation.
– Extended mode. Trigger contacts connected to the system.